Skip to content
Free shipping on orders over $90 to a shipping address within the contiguous United States!*
Free shipping on orders over $90 to a shipping address within the contiguous United States!*
Expand your capabilities

Expand your capabilities

Expand your capabilities

Expand your capabilities

  • Grove - Light Sensor v1.2

    The resistance of photoresistor decreases when the intensity of light increases. A dual OpAmp chip LM358 on board produces voltage corresponding to intensity of light(i.e. based on resistance value...

  • Grove - IR Distance Interrupter v1.2

    The module consists of an IR LED and a photosensor (phototransistor) pair. The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected...

  • Grove - Infrared Reflective Sensor v1.2

    The sensor consists of an IR LED and a photo sensor (phototransistor). The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected by ...

  • Grove - Infrared Emitter

    An infrared LED is like any other LED, with its color centered around 940nm. We can not only use the emitter to transmit data or commands, but also to emulate remotes to control your home appliance...

  • Grove - Hall Sensor

    There is a continuous-time switch on this Grove module. The output from the module switches from low (turns on) when a magnetic field (south polarity) is perpendicular to the Hall sensor and when i...

  • Grove - Gas Sensor (MQ9)

    It can detect combustible Carbon Monoxide, Coal Gas and Liquefied Gas. The sensitivity can be adjusted by the potentiometer. Hardware Overview This is an Analog output sensor. It needs to be conn...

  • Grove - Buzzer - Piezo

    The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones a...

  • Grove - Button (P)

    What does “P” mean? “P” is for “panel mount” in this product. This Grove – Button is a sister version of original Grove - Button. They are identical except the Grove connecter is moved to the back ...

  • Grove - Barometer Sensor (BMP280)

    It can widely measure pressure ranging from 300 mbar to 1200 mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolution mode. The chip only accepts 1.8V to 3.6V input voltage. Howe...

  • Grove - Air quality sensor v1.3

    This sensor is designed for comprehensive monitor over indoor air condition. It's responsive to a wide scope of harmful gases, as carbon monoxide, alcohol, acetone, thinner, formaldehyde and so on....

  • Grove - 80cm Infrared Proximity Sensor

    This sensor SharpGP2Y0A21YK, boasts a small package and very low current consumption, takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80c...

  • Grove - 6-Axis Accelerometer & Gyroscope

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to...

  • Grove - 4-Digit Display

    A 4 digit display module usually uses 12 pins. In this Grove gadget the TM1637 is used to scale down the control pins into two Grove pins. This way It only takes two digital pins from an Arduino to...

  • Grove - 4 pin Male to Grove 4 pin Cable (5 Pcs)

    With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (l...

  • Grove - 4 pin Female to Grove 4 pin Cable (5 Pcs)

    The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54 mm pitch connector.    

  • Grove - 3-Axis Digital Accelerometer (±16g)

    This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applic...

  • Grove - 2-Coil Latching Relay

    Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed w...

  • Grove - I2C Motor Driver (TB6612FNG)

    The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or one stepper motor up to 12V/1.2A. With the on-board MCU, it easily works with Arduino via the Grove I2C interface....

  • Feetech RC Micro Servo 1.8kg.cm Metal Gears Analog Servo motor

    Feetech Micro 1.8kg.cm Metal Gears Analog Servo

  • Feetech Mini Servo motor 120 degrees 9g

    Feetech Micro 0.12sec/60degrees 1.3kg.cm Analog Servo. This is a great general-purpose actuator for tiny mechanisms. The FS90 is a 9 g analog servo that offers position control over an approximate...

  • USB Cable Type A Male to Micro Type B Male

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1.8 m This cable is needed to connect your PC to a board that uses this kind of connector.

  • Two Wheels Balance Car chassis with JGA Motor Kit

    The kit uses JGA25 DC geared motors and optical encoders for higher motor control accuracy and double-layer acrylic plates for easy placement of sensors and development boards. With this kit you c...

  • Robot with 58mm Omnidirectional Wheel & Smart Car Chassis Kit

    The three-wheel drive omnidirectional wheel platform uses omnidirectional wheel technology for omnidirectional motion. It includes vertical and lateral movements. The main part of the car consists ...

  • Wire Harness - 2x4 Saleae

    4 wires intended for ground and 4 for signals. Color coded to match Saleae software (channels 4-7) Total length is 0,8 meter (31,5")

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare