Skip to content

Arduino Nano Every - Pack

Code: ABX00028-3P   /   Barcode: 7630049201767
$28.20

Overview

The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm!

The Arduino Nano is the preferred board for many projects requiring a small and easy to use microcontroller board. One example is low cost robotics, where the Nano is broadly used. If you are in the situation of needing many boards for your classroom, or if you need to present a complex prototype with many functional blocks, this pack will offer you exactly what you need: a series of Arduino Nano Every boards at a discounted price.

The Arduino Nano Every is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the ATMega4809. This will allow you making larger programs than with the Arduino Uno (it has 50% more program memory), and with a lot more variables (the RAM is 200% bigger).

The pack is available in two sizes with either 3 or 6 boards of Arduino Nano Every without headers. Whether you want to minimize the size of your prototypes or share the joy of electronics with your friends, this is the best option you will find.

Get to Know More

To know more about the history of the Nano Every don’t miss the interview with Dario Pennisi, Arduino’s hardware and firmware development manager, who led the development of this board.

Getting Started

The Getting Started section contains all the information you need to configure your board, use the Arduino Software (IDE), and start tinkering with coding and electronics.

Need Help?

Check the Arduino Forum for questions about the Arduino Language, or how to make your own . For any issues when acquiring products at the Arduino store, contact our Store Customer Support. If you purchased the Nano Every Pack and found any issues get in touch with the Official Arduino User Support as explained at our Contact Page.

Warranty

You can find here your board warranty information.


Tech specs

The Arduino Nano Every is based on the ATMega4809 microcontroller.

Microcontroller ATMega4809 (datasheet)
Operating Voltage 5V
Input Voltage (limit) 21V
DC Current per I/O Pin 20 mA
DC Current for 3.3V Pin 50 mA
Clock Speed 20MHz
CPU Flash Memory 48KB (ATMega4809)
SRAM 6KB (ATMega4809)
EEPROM 256byte (ATMega4809)
PWM Pins 5 (D3, D5, D6, D9, D10)
UART 1
SPI 1
I2C 1
Analog Input Pins 8 (ADC 10 bit)
Analog Output Pins Only through PWM (no DAC)
External Interrupts all digital pins
LED_BUILTIN 13
USB Uses the ATSAMD11D14A (datasheet)
Length 45 mm
Width 18 mm
Weight 5 gr (with headers)

Documentation

OSH: Schematics

The Arduino Nano Every is open-source hardware! You can build your own board using the following files:

EAGLE FILES IN .ZIP SCHEMATICS IN .PDF

Pinout Diagram

Download the full pinout diagram as PDF here.

Download the Fritzing file here.

Get Inspired

FAQs

Batteries, Pins and board LEDs

  • Batteries: the Nano Every has no battery connector, nor charger. You can connect any external battery of your liking as long as you respect the voltage limits of the board.
  • Vin: This pin can be used to power the board with a DC voltage source. If the power is fed through this pin, the USB power source is disconnected. This pin is an INPUT. Respect the voltage limits to assure the proper functionality of the board.
  • 5V: This pin outputs 5V from the board when powered from the USB connector or from the VIN pin of the board.
  • 3.3V: This pin outputs 3.3V through the on-board voltage regulator.
  • LED ON: This LED is connected to the 5V input from either USB or VIN.

Arduino Nano Every - Pack

Code: ABX00028-3P   /   Barcode: 7630049201767
$28.20

Get the Nano Every in bulk to run a course or power all of your projects with Arduino.