Skip to content
Free shipping on orders over $90 to a shipping address within the contiguous United States!*
Free shipping on orders over $90 to a shipping address within the contiguous United States!*
DIY

DIY

DIY

DIY

  • Gravity: Analog Electrical Conductivity Sensor / Meter For Arduino

    DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of an aqueous solution, and then to evaluate the water quality, which is often used...

  • EMoRo 2560 Controller

    The EMoRo 2560 is the first Arduino compatible controller with CE certification. Built around an ATmega2560 microcontroller, the EMoRo 2560 comes with a massive number of connections: 16 digital I/...

  • DYNAMIXEL Shield for Arduino MKR Series

    DYNAMIXEL Shield for Arduino MKR allows users to easily use ROBOTIS’ DYNAMIXEL Series along with Arduino MKR Boards. The features are as follows: Compatible with Arduino MKR Compatible with RO...

  • DYNAMIXEL XL-320

    XL-320 has a high performance and precise control feature compared to its compact size. It supports TTL communication with a daisy chain feature to help easily build small robots. XL-320 has a high...

  • CCS811 Air Quality Sensor-Breakout

    This CCS811 Air Quality Sensor Breakout Board can measure the eCO2 (equivalent CO2) and TVOC (Total Volatile Organic Compounds) density. It can be widely used in many applications, such as air qual...

  • 3Dsimo MultiPro (4in1)

    3Dsimo MultiPro is multifunctional tool that offers 4 basic functions: 3D drawing - using any current and future 3D printing filament (diameter of 1,75mm) Soldering - using soldering attachme...

  • Silicone sleeve Arduino Nano 33 BLE Sense

    The Arduino Nano 33 BLE Sense Protective Silicone Case is designed to perfectly fit your Arduino Nano 33 BLE Sense, and to protect it in case of adventurous experiments. Take full advantage of the...

  • QuadHands Classic Helping Hands Tool

    Use for any electronic, soldering, crafting, painting, replica, figurine and hobby work - or any precision project that requires extreme accuracy.                              Four all-metal flex...

  • Robotis Mini

    The ROBOTIS MINI can be programmed using RoboPlus Task (R+Task), a graphical, drag-and-drop programming tool based on C++. You can also create complex motions or choreography using RoboPlus Motion ...

  • 3Dsimo KIT 2 (4in1)

    Next generation of our open-ource pen. All data is available at our Github, where you can find firmware, circuit board and 3D printed parts open for customization, so you can customize 3Dsimo Kit 2...

  • LYRA | Handheld Game Console (Ready-To-Go)

    Creoqode Lyra is a handheld game console. Powered by Raspberry Pi CM3L (Compute Module 3 Lite), Lyra will be your game console, personal computer and entertainment system at the same time.  L...

  • CAN-BUS Shield v2

    It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks to the CAN-BUS, makers are able to hack their cars!  It adopts MCP2515 CAN-BUS controller with SPI interfac...

  • Grove - Universal 4 Pin Buckled 50cm Cable (5 Pcs)

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 50 cm cables

  • Grove - Universal 4 Pin Buckled 30cm Cable (5 Pcs)

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 30 cm cables

  • Grove - Thumb Joystick

    The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module...

  • Grove - OLED Display 0.96"

    Compared to LCD, OLED screens have a number of advantages such as high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power...

  • Grove - 6-Axis Accelerometer & Gyroscope

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to...

  • Grove - 4 pin Male to Grove 4 pin Cable (5 Pcs)

    With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (l...

  • Grove - 4 pin Female to Grove 4 pin Cable (5 Pcs)

    The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54 mm pitch connector.    

  • Grove - 3-Axis Digital Accelerometer (±16g)

    This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applic...

  • Grove - 2-Coil Latching Relay

    Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed w...

  • Feetech RC Micro Servo 1.8kg.cm Metal Gears Analog Servo motor

    Feetech Micro 1.8kg.cm Metal Gears Analog Servo

  • Feetech Mini Servo motor 120 degrees 9g

    Feetech Micro 0.12sec/60degrees 1.3kg.cm Analog Servo. This is a great general-purpose actuator for tiny mechanisms. The FS90 is a 9 g analog servo that offers position control over an approximate...

  • USB Cable Type A Male to Micro Type B Male

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1.8 m This cable is needed to connect your PC to a board that uses this kind of connector.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare