Skip to content
DIY

DIY

  • $27.00

    It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks to the CAN-BUS, makers are able to hack their cars!  It adopts MCP2515 CAN-BUS controller with SPI interface and MCP2551 CAN transceiver to give you Arduino CAN-BUS capability. Default pinout is OBD-II and CA...

    View full details
    $27.00
  • $4.30

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 50 cm cables

    $4.30
  • $3.20

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 30 cm cables

    $3.20
  • $6.50

    The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module is in working mode, it will output two analog values, representing two directions. Compared to a no...

    View full details
    $6.50
  • $17.50

    Compared to LCD, OLED screens have a number of advantages such as high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power consumption. Features Grove compatible interface Communicate Mode:I2C Low power consumption Displa...

    View full details
    $17.50
  • $12.90

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to acceleration and can use different ranges of angular rate measurement. It is provided with a detail...

    View full details
    $12.90
  • $3.20

    With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (like the Arduino MKR family). In fact, this cable turns the 4 pin JST connectors of the atmospheric s...

    View full details
    $3.20
  • $4.30

    The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54mm pitch connector. Specification Grove side uses buckled connector (JST style 2.0mm pitch) Female jumper is 2.54mm pitch pin header compatible

    $4.30
  • $10.90

    This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applications that don’t require too large measurement range, this is a great choice because it’s durable, ...

    View full details
    $10.90
  • Sold out
    $11.50

    Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed when the work state do not need to change, making the module especially suitable for low-power projec...

    View full details
    $11.50
  • Sold out
    $7.20

    The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or one stepper motor up to 12V/1.2A. With the on-board MCU, it easily works with Arduino via the Grove I2C interface. This diver board is based on TB6612FNG, which is a driver IC for DC motor and stepper motor with o...

    View full details
    $7.20
  • Sold out
    $14.95

    It is mainly used in mechanical motion control, Like CNC milling machine, laser cutter, 3D printer, it also can used in robot platform motion control! Specification:   •Phase: 2 •Step Angle: 1.8° •Voltage: 12/24 •Resistance: 11ohm •Rate Current: 0.45A/Phase •Phase Resistance: 7.5ohm/Phase...

    View full details
    $14.95
  • $7.50

    Feetech Micro 360 Degree Continuous Rotation Servo v2: Dead band has been expanded from 10us to 90us Uses SMD potentiometer

    $7.50
  • $7.50

    Feetech Micro 1.8kg.cm Metal Gears Analog Servo

    $7.50
  • $6.50

    Feetech Micro 0.12sec/60degrees 1.3kg.cm Analog Servo. This is a great general-purpose actuator for tiny mechanisms. The FS90 is a 9 g analog servo that offers position control over an approximate 120° operating angle for servo pulses between 900 µs and 2100 µs. As with most servos, the pulse ra...

    View full details
    $6.50
  • $19.95

    Feetech 9kg Torque analog servo - Standard RC Metal Gear Servo Motor: A servo motor is a rotary or linear drive that allows precise control of angle or linear position, speed and acceleration.  It consists of a suitable motor coupled with a sensor for position feedback.  Servo motors are widely u...

    View full details
    $19.95
  • $11.95

    Feetech Continuous Rotation 360 degrees 6kg.cm

    $11.95
  • $8.69

    Board Enclosure is what you need to protect your Arduino Board. Specifically designed for the Arduino Uno, Zero, Mega, Due; it accommodates the board and your shield perfectly and keep your standalone projects safe from short circuits and external hazards

    $8.69
  • $5.90

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1.8 m This cable is needed to connect your PC to a board that uses this kind of connector.

    $5.90
  • $26.99

    The kit uses JGA25 DC geared motors and optical encoders for higher motor control accuracy and double-layer acrylic plates for easy placement of sensors and development boards. With this kit you can assemble your balance car, a mini Segway, or your personal project. Select the right sensor and de...

    View full details
    $26.99
  • Sold out
    $84.99

    The three-wheel drive omnidirectional wheel platform uses omnidirectional wheel technology for omnidirectional motion. Includes vertical and lateral movements. The main part of the car consists of three motors and three omnidirectional wheels. The motor adopts photoelectrically encoded DC geared ...

    View full details
    $84.99
  • $9.98

    4 wires intended for ground and 4 for signals. Color coded to match Saleae software (channels 4-7) Total length is 0,8 meter (31,5")

    $9.98
  • $129.00

    During the assembly, users will get familiar with each component of a game console and explore their functions. Assembly is fairly simple and does not require any tools or special skills. No soldering is needed to make Pyxa work. Resolution of Pyxa is 128 x 160 pixels and it is capable of display...

    View full details
    $129.00
  • $56.90

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor inter...

    View full details
    $56.90
x