Skip to content
Free shipping on orders over $90 to a shipping address within the contiguous United States!*
Free shipping on orders over $90 to a shipping address within the contiguous United States!*
New Products

New Products

New Products

New Products

  • Box 500 electrolytic capacitors

    Transparent plastic box with compartments and closing hinge containing 500 radial electrolytic capacitors divided into 24 values ranging from 0.1µF - 1000µF. Dielectric material: aluminum. Conten...

  • Breadboard - 400 contacts

    Dimensions: 82 x 55 mm.  White color.

  • Breadboard - 830 contacts

    This is a 830-point experimental ABS board with a self-adhesive base. Dimensions (mm): 165x55x10 Weight: 69 grams.

  • Breadboard - 840 contacts

    This is a 840-point experimental ABS board with a self-adhesive base. Dimensions (mm): 174x66,5x8,5 mm Weight: 100 grams.

  • Breadboard 100x50

    100 x 50 mm through hole board PCB

  • Breadboard 150x90

    150x90 mm through hole board PCB

  • DC/DC converter with adjustable 1.5-35V output

    Step-Down DC/DC switching converter, with particularly small dimensions (48.35 x 23.35 x 14 mm), capable of converting a DC voltage between 3 and 40 volts into an output voltage from 1.5 to 35 volt...

  • DC/DC Step-Down converter with 1.2-30 V 5A output

    DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer). The maximum available curre...

  • DC/DC Step-up converter with 4-30V output

    DC/DC step-up converter with particularly small dimensions (51 x 21.5 x 13 mm), capable of converting a DC voltage between 3.5 and 30 volts into an output voltage from 4 to 30 volts (adjustable via...

  • Digital control soldering station

    Soldering station with digital temperature control between 160°C and 480°C and indication through display.

  • Gesture Breakout with APDS-9960

    With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...

  • IR receiver sensor

    It has only three terminals and operates on 5 V power supply. Vdd= + 5 Vdc, GND= ground, OUT= TTL signal output

  • L298 driver for DC/Stepper motors

    Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...

  • Microwave motion radar

    The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...

  • Mini encapsulated solar cell 2V 0,6W

    A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.

  • Mini solar cell 2V 200mA

    A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

  • Neopixel Stick with 8 RGB WS2812 LEDs and integrated driver

    Stick with Neopixel technology with 8 RGB LEDs that can be individually managed, each of which can produce 256 shades of its own color, determining a total of 16,777,216 colors. The data channel f...

  • NodeMCU ESP8266

    Based on the ESP8266 Wi-Fi transceiver module and the CH340 USB converter chip, this compact (Open Source) development and prototyping board is ideal for IoT applications. The Wi-Fi module is comp...

  • NFC/RFID reader with two transponders

    It can function as an RFID card reader/writer, NFC reader with Android smartphone and in wireless mode with two identical devices. It can be used with Arduino to create access control devices. The...

  • Pack of 50 female-female jumper wires in various colors

    Ideal for use with experimental boards!

  • Ring with 24 RGB WS2812 LEDs and integrated driver

    The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino.  You can set the refresh frequency as desired to make certain light effects i...

  • Ring with 16 RGB WS2812 LEDs and integrated driver

    The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects imp...

  • Ring with 60 RGB WS2812 LEDs and integrated driver

    The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects im...

  • Set of 70 assorted color 5mm LEDs

    A set consisting of 10 blue 5 mm LEDs, 10 green, 10 red, 10 yellow, 10 white, 10 common anode RGB and 10 common anode bicolour (red-green) LEDs.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare