Tools

Get the SEGGER J-Link PLUS Compact debug probe: a compact version of the J-Link PLUS. Mounts securely & unobtrusively into development and end user equipment. Based on 32-bit RISC CPU, it communicates at high speed with supported target CPUs. Thanks to a small size with two mounting holes, it...

Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. SEGGER J-Link debuggers are the most popular choice for optimizing the debugging and flash programming experience.

Get the J-Link EDU Mini, offering the same functionality as the J-Link EDU but in a reduced form factor. The J-Link EDU Mini Classroom Edition includes twelve J-Link EDU Mini units on special offer. Designed for education purposes and hobbyists, it provides access to top-of-the-line debug probe f...

The J-Link 19-pin Cortex-M Adapter may also be used to connect J-Link to a non Cortex-M target as far as the target connector uses the same pinout as shown below. By default, TRST is not connected, but the Cortex-M Adapter comes with a solder bridge (NR1) which allows TRST to be connected to pin ...

Extremely flexible, even after folded it always returns to its original shape. Dimensions 450 x 300 mm. Make your soldering and repair work easy with this multifunctional mat. ESD-Safe Heat-resistant up to 500°C Pliable, returns to its original shape 3x Small storage boxes and 3x magnetic a...

SEGGER J-Link BASE Compact:   Supports a broad range of microcontrollers  Supports direct download into RAM and flash memory Multiple CPUs supported—8051, PIC32, RX, ARM7/9/11, Cortex-M/R/A, RISC-V  Download speed up to 1 MByte/s Supports unlimited breakpoints in flash memory, additional l...

DT71 has a unique ternary structure, which can be separated into controller, testing arms and tweezer tips, flexible to be replaced and combined. 360° rotatable with OLED screen, visible at all angles. Smart gesture recognition, automatically identify left/right hand operation and adjust screen d...

TS80P is the upgraded version of TS80 Smart Soldering Iron. TS80P is a smart soldering iron powered by USB Type-C® PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks and mobile power supplies that comply with PD2.0 (12V 3A)/QC3.0 (9V 2A) standard. Its output power has...

TS100 employs 304 stainless steel nested shell of Polycarbonate . It is designed with safety circuit and anti-static structure, integrated with DC5525 12-24V port, dual-temperature sensors and accelerated sensors with STM32 chip. Under these functionalities, temperature can be controlled accurate...

We've already released the Grove - I2C Hub (4 Port), now comes the 6 port version, the same size, two more connectors, almost half the price! As you may know, the 7 address length I2C bus allows up to 128 I2C devices to access. At present, there are over 80 Grove I2C modules in Seeed, however, no...

Extremely flexible, even after folded it always returns to its original shape. Dimensions 337 x 227 mm.

It allows you to hold small objects and to have both hands free. The adjustable tweezers and the adjustable magnifying glass, available to you, allow you to carry out precision work with extreme comfort. It has on / off switch for the LED light.

Stereo Enclosed Speaker is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size and screw holes make it to be mounted. Let your robot have a loud voice, and no distortion.

DFPlayer mini MP3 player is a small and low cost MP3 module player with a simplified output directly to the speaker. The module can be used as a standalone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities. It pe...

Note: This item is a kit which requires assembly and soldering. Different Arduino MKR Shields can be used via our HAT as an extension for the Raspberry Pi. Furthermore, Arduino offers different Arduino boards for different IoT networks like Sigfox, Lora, NB-IOT. These boards can be used as a mo...

A single solution to connect your smart devices to the Cloud. The antenna supports the GSM 850 / 900 / 1800 / 1900 MHz and UMTS bands. Designed for small devices, this antenna will work when used as wireless terminal, gateway, or access point. It is a ground plane independent design, housed in a ...

Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed when the work state do not need to change, making the module especially suitable for low-power projec...

The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones and effects.  Grove - Buzzer is a simple yet enjoyable twig to use. It can output noise at a volume ...

This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applications that don’t require too large measurement range, this is a great choice because it’s durable, ...

Use for any electronic, soldering, crafting, painting, replica, figurine and hobby work - or any precision project that requires extreme accuracy.                              Four all-metal flexible gooseneck helping hands are easily positioned where you want them. Eliminates the frustration o...

The Mates Stand offers a simple connection for a MatesBUS compatible device, such as the TIMI-96. It eases development by propping the MatesBus compatible device up on an angle (35 degrees off vertical), aiding development when standing on a desk or bench. The Mates Stand breaks out the ten sign...

Power Supply for TS100 Soldering Iron