Products
Products
-
Grove - 2-Coil Latching Relay
Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed w...
Original price $7.60 - Original price $7.60Original price$7.60$7.60 - $7.60Current price $7.60| / -
Grove - 3-Axis Digital Accelerometer (±16g)
This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applic...
Original price $10.90 - Original price $10.90Original price$10.90$10.90 - $10.90Current price $10.90| / -
Grove - 4 pin Female to Grove 4 pin Cable (5 Pcs)
The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54 mm pitch connector.
Original price $3.50 - Original price $3.50Original price$3.50$3.50 - $3.50Current price $3.50| / -
Grove - 4 pin Male to Grove 4 pin Cable (5 Pcs)
With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (l...
Original price $2.00 - Original price $2.00Original price$2.00$2.00 - $2.00Current price $2.00| / -
Grove - 4-Digit Display
A 4 digit display module usually uses 12 pins. In this Grove gadget the TM1637 is used to scale down the control pins into two Grove pins. This way It only takes two digital pins from an Arduino to...
Original price $6.50 - Original price $6.50Original price$6.50$6.50 - $6.50Current price $6.50| / -
Grove - 6-Axis Accelerometer & Gyroscope
It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to...
Original price $12.90 - Original price $12.90Original price$12.90$12.90 - $12.90Current price $12.90| / -
Grove - 80cm Infrared Proximity Sensor
This sensor SharpGP2Y0A21YK, boasts a small package and very low current consumption, takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80c...
Original price $15.30 - Original price $15.30Original price$15.30$15.30 - $15.30Current price $15.30| / -
Grove - Air quality sensor v1.3
This sensor is designed for comprehensive monitor over indoor air condition. It's responsive to a wide scope of harmful gases, as carbon monoxide, alcohol, acetone, thinner, formaldehyde and so on....
Original price $6.90 - Original price $6.90Original price$6.90$6.90 - $6.90Current price $6.90| / -
Grove - Alcohol Sensor
It is built with MQ303A semiconductor alcohol sensor. It has good sensitivity and fast response to alcohol, making it suitable for building a breathalyzer. This Grove module implements all the nece...
Original price $8.70 - Original price $8.70Original price$8.70$8.70 - $8.70Current price $8.70| / -
Grove - Barometer Sensor (BMP280)
It can widely measure pressure ranging from 300 mbar to 1200 mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolution mode. The chip only accepts 1.8V to 3.6V input voltage. Howe...
Original price $9.80 - Original price $9.80Original price$9.80$9.80 - $9.80Current price $9.80| / -
Grove - Button (P)
What does “P” mean? “P” is for “panel mount” in this product. This Grove – Button is a sister version of original Grove - Button. They are identical except the Grove connecter is moved to the back ...
Original price $1.50 - Original price $1.50Original price$1.50$1.50 - $1.50Current price $1.50| / -
Grove - Buzzer - Piezo
The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones a...
Original price $1.49 - Original price $1.49Original price$1.49$1.49 - $1.49Current price $1.49| / -
Grove - Digital Infrared Temperature Sensor
Both the IR sensitive thermopile detector chip and the signal conditioning chip are integrated in the same package.This module communicates with Arduino using SMBus and up to 127 sensors can be rea...
Original price $30.80 - Original price $30.80Original price$30.80$30.80 - $30.80Current price $30.80| / -
Grove - Dust Sensor(PPD42NS)
Provide reliable data for air purifier system Easy maintenance PWM output Grove compatible interface Compact and light design. This Dust Sensor gives a good indication of the air quality in an env...
Original price $9.99 - Original price $9.99Original price$9.99$9.99 - $9.99Current price $9.99| / -
Grove - Gas Sensor (MQ9)
It can detect combustible Carbon Monoxide, Coal Gas and Liquefied Gas. The sensitivity can be adjusted by the potentiometer. Hardware Overview This is an Analog output sensor. It needs to be conn...
Original price $9.00 - Original price $9.00Original price$9.00$9.00 - $9.00Current price $9.00| / -
Grove - Hall Sensor
There is a continuous-time switch on this Grove module. The output from the module switches from low (turns on) when a magnetic field (south polarity) is perpendicular to the Hall sensor and when i...
Original price $6.50 - Original price $6.50Original price$6.50$6.50 - $6.50Current price $6.50| / -
Grove - HCHO Sensor
Its design is based on the WSP2110 whose conductivity changes with the concentration of VOC gas in air. Through the circuit, the conductivity can be converted to output signal that corresponding to...
Original price $16.40 - Original price $16.40Original price$16.40$16.40 - $16.40Current price $16.40| / -
Grove - High Precision Barometric Pressure Sensor (DPS310)
Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level. Typical Applications: Indoor Navigation (floo...
Original price $8.00 - Original price $8.00Original price$8.00$8.00 - $8.00Current price $8.00| / -
Grove - I2C Hub (6 Port)
We've already released the Grove - I2C Hub (4 Port), now comes the 6 port version, the same size, two more connectors, almost half the price! As you may know, the 7 address length I2C bus allows up...
Original price $1.70 - Original price $1.70Original price$1.70$1.70 - $1.70Current price $1.70| / -
Grove - Infrared Emitter
An infrared LED is like any other LED, with its color centered around 940nm. We can not only use the emitter to transmit data or commands, but also to emulate remotes to control your home appliance...
Original price $4.30 - Original price $4.30Original price$4.30$4.30 - $4.30Current price $4.30| / -
Grove - Infrared Receiver
There is an IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38...
Original price $3.89 - Original price $3.89Original price$3.89$3.89 - $3.89Current price $3.89| / -
Grove - Infrared Reflective Sensor v1.2
The sensor consists of an IR LED and a photo sensor (phototransistor). The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected by ...
Original price $5.40 - Original price $5.40Original price$5.40$5.40 - $5.40Current price $5.40| / -
Grove - IR Distance Interrupter v1.2
The module consists of an IR LED and a photosensor (phototransistor) pair. The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected...
Original price $6.50 - Original price $6.50Original price$6.50$6.50 - $6.50Current price $6.50| / -
Grove - Light Sensor v1.2
The resistance of photoresistor decreases when the intensity of light increases. A dual OpAmp chip LM358 on board produces voltage corresponding to intensity of light(i.e. based on resistance value...
Original price $1.99 - Original price $1.99Original price$1.99$1.99 - $1.99Current price $1.99| /