Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal $0.00
Home Automation

Home Automation

Smart living made simple

Home Automation

Smart living made simple

Home Automation

  • Arduino Nano

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a diffe...

  • USB 2.0 Cable Type A/B

    Use it to connect Arduino Uno, Arduino Mega 2560, Arduino 101 or any board with the USB female A port of your computer. Cable lenght is approximately 100cm. Cable color and shape may vary slightly ...

  • ARDUINO UNO WiFi REV2

    The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family. Whether you are looking at building a sensor network connected to your office ...

  • Arduino MKR Relay Proto Shield

    The MKR Relay Protoshield allows you to easily add relays to your MKR board based project. The shield provides two relays (Datasheet)  called RELAY1 and RELAY2 commanded by pin 1 and pin 2 r...

  • 14.5mm Strip 10 ways 2 pcs

    Pair of 10 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Rec...

  • 10 jumper wires 150mm male

    These are a long flexible jumpers wires of 150 mm with a male connectors on the ends. They are perfect to use to make projects with your Arduinos and breadboard.

  • 1.2 K ohm resistor 10x

    Resistor package color and shape may vary slightly from image as our stock rotates.

  • Grove - Servo

    Grove - Servo is used in driving mechanism of robots. The module is a bonus product for Grove lovers. We regulated the three-wire servo into a Grove standard connector. You can plug and play it as ...

  • Grove - Temperature & Humidity Sensor

    This is a multifunctional sensor that gives you temperature and relative humidity information at the same time. It utilizes a TH02 sensor that can meet measurement needs of general purposes. It pr...

  • Grove - Temperature & Humidity Sensor (SHT31)

    The sensor(chip) used in the module is designed with Sensirion’s CMOSens® technology. The chip is well calibrated, linearized and compensated for digital output. The typical accuracy of this module...

  • Grove - Temperature & Humidity Sensor Pro

    Grove-Temperature & Humidity Sensor Pro is a high accuracy temperature and humidity sensor based on the DHT22 module (also known as AM2302 or RHT03). High-cost performance and high precision ma...

  • URM06 - UART Ultrasonic Sensor

    Ultrasonic sensors emit ultrasonic pulses, and by measuring the time of ultrasonic pulse reaches the object and back to the transducer, the distance of sensor from the target object is calculated. ...

  • CAN-BUS Shield v2

    It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks to the CAN-BUS, makers are able to hack their cars!  It adopts MCP2515 CAN-BUS controller with SPI interfac...

  • Arduino 4 Relays Shield

    The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. The Shield featur...

  • Grove - RGB LED Stick (15-WS2813 Mini)

    Grove - RGB LED Stick (15-WS2813 Mini) is a cost-effective full color LED stick with 15 chainable and programmable WS2813 mini LEDs. This Grove - RGB LED stick is similar to Grove - RGB LED stic...

  • J-Link EDU Mini classroom package

    Get the J-Link EDU Mini, offering the same functionality as the J-Link EDU but in a reduced form factor. The J-Link EDU Mini Classroom Edition includes twelve J-Link EDU Mini units on special offer...

  • Portenta Machine Control

    The Portenta Machine Control is a fully-centralized, low-power, industrial control unit able to drive equipment and machinery. It can be programmed using the Arduino framework or other embedded dev...

  • MP2636 Power Booster & Charger Module

    In many applications, lithium batteries are used as our power solutions. In this kind of application, the most two important things are the power boost and battery charger. These two points are a p...

  • Arduino Mega 2560 Rev3

    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial po...

  • Arduino Zero

    The Zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a variety of project opport...

  • Grove - I2C Hub (6 Port)

    We've already released the Grove - I2C Hub (4 Port), now comes the 6 port version, the same size, two more connectors, almost half the price! As you may know, the 7 address length I2C bus allows up...

  • Portenta H7 Lite Connected

    The Portenta H7 Lite Connected is designed to provide the computational power of the Portenta H7 for AI applications and low-latency control solutions, with a module that is made more cost-effectiv...

  • Portenta CAT.M1/NB IoT GNSS Shield

    The Portenta Cat. M1/NB IoT GNSS Shield allows you to enhance the connectivity features of your Portenta applications. The shield leverages a Cinterion TX62 wireless module by Thales, designed for ...

  • Nicla Vision

    Nicla Vision allows you to build your next smart project. Ever wanted an automated house? Or a smart garden? Well, now it’s easy with the Arduino IoT Cloud compatible boards. It means: you can conn...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare