Accessories

Even though Arduino Education kits are jam-packed with everything you need, we know that mislaying parts in the excitement of getting hands-on in a classroom can sometimes happen. In the Arduino Replacements Pack, you’ll find all the common electronics parts two students may need to complete thei...

Arduino Engineering Kit R2 contains all the components students need to complete each project, but we know that in the excitement of using the kit, the motors may sometimes burn, break or simply get lost. In the Engineering Kit - Motors Backup, you’ll find all the replacement motors students may...

The USB-C Hub with 4 USB-A ports 3.2 Gen1 (USB 3.0) Hub connects all your computer peripherals, USB sticks and external hard drives with a USB-A port to your laptop with USB-C. The USB-C Hub 3.2 with 4 USB-A ports is a plug and play device and is powered by your laptop's USB port. No additional ...

Use the USB-C 3.2 Gen1 to HDMI 4K adapter to connect a HDMI screen or beamer to a notebook. The adapter supports a maximum resolution of 4096 x 2160 (4K) @ 30Hz. The AC7022 has a Power Delivery Pass-Through port (max. 60W) and an additional USB-A port. Solid aluminium USB-C 3.2 Gen1 to HDMI vi...

The Arduino Nano 33 BLE Sense Protective Silicone Case is designed to perfectly fit your Arduino Nano 33 BLE Sense, and to protect it in case of adventurous experiments. Take full advantage of the motion sensors on your board, protect it against impact with the silicon case, and launch different...

Pair of 8 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Receptacle Style: Square Number of Ways/Pins: 8 Pin Spacing: 2.54 mm Component Height: 23.5mm (Plasti...

14 pin Female/Male header strips MKR1000 printed, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Receptacle Style: Square Number of Ways/Pins: 14 Pin Spacing: 2.54 mm Component Height: 20.7mm (Pl...

Don’t pay too much attention where to place your UNO-Type and size boards. The Holder Type Uno will help guard you boards from accidental damages. It fits every UNO sized boards, and you can choose among a number of nice colors.Use screws to attach the board and use the different colors to tell y...

The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo battery charger. Please note that currently the MKR2UNO adapter is compatible only with MKR100...

Arduino SIM card offers easy, global cellular connectivity for your Arduino IoT Cloud projects. You can monitor your devices anytime, anywhere in the world thanks to the GSM / 3G network, which currently is the most extended one. Arduino SIM is ideal for connected devices on the go, or in areas w...

What does “P” mean? “P” is for “panel mount” in this product. This Grove – Button is a sister version of original Grove - Button. They are identical except the Grove connecter is moved to the back so that you can easily use it as a neat and wire-free human interface device.

The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module is in working mode, it will output two analog values, representing two directions. Compared to a no...

Pair of 10 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Receptacle Style: Square Number of Ways/Pins: 10 Pin Spacing: 2.54 mm Component Height: 23.5mm (Plas...

Nano Motor Carrier is the perfect add-on for the Nano 33 IoT board as it works to extend and power up its functionality. Designed to facilitate motor control, Nano Motor Carrier takes care of the electronics required to control motors, allowing students to focus on prototyping and building their...

This is protective case designed specifically for the Arduino Zero The case is a two-piece injection-moulded ABS enclosure that snaps together around the Arduino Zero. Holds the Arduino Zero firmly in place. It provides tough protection for the Arduino Zero while providing access to all Arduino Z...

Atmel ATmega328 microcontoller in a DIL-28 package , pre-loaded with the Arduino UNO 16MHz bootloader. Using this device enables the use of Arduino code in a custom embedded project without having to use an actual Arduino board. 

6/8/10pin Female/Male header strips Uno printed and 2x3 Female header, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Receptacle Style: Square Number of Ways/Pins: 6/8/10 Pin Spacing: 2.54 m...

Enhance your Robotis Mini capabilities with the Spare Parts. The ROBOTIS MINI Spare Parts Pack 1 includes components from the ROBOTIS MINI kit such as the battery, cables, rivets and tapping screws. Look at the full list here: 1 Li-ion battery 3.7V 1300mAh LB-041 1 Li-ion Battery Charger Set...

The AC7042 USB-C 3.2 Gen1 4K Multiport Dock turns a notebook into a complete work station by connecting only one flexible USB-C cable. This multiport dock extends the notebook with a 4K monitor via HDMI, Gigabit Ethernet connection, three USB-A ports and a USB-C pass-through charging port with p...