Skip to content
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal $0.00
Robotics

Robotics

Where ideas take motion

Robotics

Where ideas take motion

Robotics

  • Arducam 0.3MP OV7675 20-pin DVP Camera Module for Arduino GIGA R1 WiFi

    The Arducam OV7675 camera provides support for resolutions of up to 640x480 pixels, ensuring the capture of clear and sharp images. Its versatile range of features enhances the functionality of you...

  • HM01B0 QVGA Monochrome DVP Camera Module for Arduino GIGA R1 WiFi Board

    This camera is based on HM01B0 QVGA monochrome rolling shutter image sensor. The sensor is an Ultra Low Power Image Sensor designed for Always-on vision devices and applications. With high light se...

  • HM0360 VGA Monochrome DVP Camera Module for Arduino GIGA R1 WiFi Board

    The camera module is based on HM0360 VGA image sensor, which is an ultralow power, Back Side Illuminated (BSI) CMOS sensor designed for energy efficient smart vision applications, such as object-sp...

  • 2MP GC2145 Color DVP Camera Module for Arduino GIGA R1 WiFi Board

    This camera is based on GC2415 Color rolling shutter image sensor. The GC2145 incorporates a 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal processor. The 2MP GC2145 camera ...

  • Grove - Line Finder v1.1

    Most of automated robotic projects start from a line-following robot, Grove - Line finder v1.1, designed to achieve this task easily and quickly. Those eye-like sensors on the board are actually IR...

  • USB-C Hub 3.2 with 4 USB-A ports

    The USB-C Hub with 4 USB-A ports 3.2 Gen1 (USB 3.0) Hub connects all your computer peripherals, USB sticks and external hard drives with a USB-A port to your laptop with USB-C. The USB-C Hub 3.2 w...

  • CircuitMess Wheelson

      Autonomous cars are the future and we’ll show you how it works. This tiny wheeled robot has a camera and a microcomputer and can be programmed to autonomously navigate a small road while driv...

  • Gravity: IO Expansion Shield for Arduino v 7.1

    Fast robotics prototyping made simple thanks to this expansion shield. No need of soldering and wiring, things that often becomes an issue when a bridged connection happens and components break. Of...

  • TETRIX Prime Expansion Set

    The TETRIX PRIME Expansion Set comes with three major parts that will provide students more design options for their robots. Aluminum linkages – Mechanical linkages connect to manage force and mov...

  • TETRIX Max Expansion Set

    Add this expansion set to your TETRIX® collection to build bigger and more complex robots and complete more challenging engineering projects. This set includes 630+ building elements and comes comp...

  • DYNAMIXEL Shield for Arduino MKR Series

    DYNAMIXEL Shield for Arduino MKR allows users to easily use ROBOTIS’ DYNAMIXEL Series along with Arduino MKR Boards. The features are as follows: Compatible with Arduino MKR Compatible with RO...

  • DYNAMIXEL XL-320

    XL-320 has a high performance and precise control feature compared to its compact size. It supports TTL communication with a daisy chain feature to help easily build small robots. XL-320 has a high...

  • USB-C to HDMI multiport adapter 4K, USB hub, PD pass through

    Use the USB-C 3.2 Gen1 to HDMI 4K adapter to connect a HDMI screen or beamer to a notebook. The adapter supports a maximum resolution of 4096 x 2160 (4K) @ 30Hz. The AC7022 has a Power Delivery Pas...

  • Grove - Servo

    Grove - Servo is used in driving mechanism of robots. The module is a bonus product for Grove lovers. We regulated the three-wire servo into a Grove standard connector. You can plug and play it as ...

  • DC/DC converter with adjustable 1.5-35V output

    Step-Down DC/DC switching converter, with particularly small dimensions (48.35 x 23.35 x 14 mm), capable of converting a DC voltage between 3 and 40 volts into an output voltage from 1.5 to 35 volt...

  • L298 driver for DC/Stepper motors

    Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...

  • DC/DC Step-up converter with 4-30V output

    DC/DC step-up converter with particularly small dimensions (51 x 21.5 x 13 mm), capable of converting a DC voltage between 3.5 and 30 volts into an output voltage from 4 to 30 volts (adjustable via...

  • Pack of 50 female-female jumper wires in various colors

    Ideal for use with experimental boards!

  • Breadboard Jumper Wire Pack (200mm&100mm)

    Breadboard 1 pin dual-male jumper wire 75pcs pack. The pack comes with 2 different lengths: 200mm (25pcs) and 100mm(50pcs). Perfect design and adequate quality for breadboard and Arduino connectio...

  • USB Cable Type A Male to Micro Type B Male

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1 m This cable is needed to connect your PC to a board that uses this kind of connector.

  • Grove - Buzzer - Piezo

    The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones a...

  • Box of 100 pcs M.O. 10 VAL. trimmer resistors from 500 to 1 Mohm

    Plastic package containing 10 pieces of the following horizontal mount trimmer values: 500 ohm (501) 1 kohm (102) 2 kohm (202) 5 kohm (502) 10 kohm (103) 20 kohm (203) 50 kohm (503) 100 k...

  • Solar cell 1 V - 200 mA

    A small photovoltaic panel, ideal for conducting experiments with solar energy.

  • Mini solar cell 2V 200mA

    A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare