Take on the challenge of DIY
choose a kit with step-by-step instructions and all the components to build a fun and festive project, laughing (and learning) all the way.
Take on the challenge of DIY
choose a kit with step-by-step instructions and all the components to build a fun and festive project, laughing (and learning) all the way.
Take on the challenge of DIY
-
Breadboard - 840 contacts
This is a 840-point experimental ABS board with a self-adhesive base. Dimensions (mm): 174x66,5x8,5 mm Weight: 100 grams.
Original price $6.00 - Original price $6.00Original price$6.00$6.00 - $6.00Current price $6.00| / -
L298 driver for DC/Stepper motors
Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...
Original price $7.00 - Original price $7.00Original price$7.00$7.00 - $7.00Current price $7.00| / -
Grove - OLED Display 0.96"
Compared to LCD, OLED screens have a number of advantages such as high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power...
Original price $10.49 - Original price $10.49Original price$10.49$10.49 - $10.49Current price $10.49| / -
Gravity: Analog pH Sensor - Meter Kit
Analog pH Sensor / Meter Kit specially designed for Arduino controllers and has convenient and practical "Gravity" connector and a bunch of features. Instant connection to your probe an your Arduin...
Original price $29.50 - Original price $29.50Original price$29.50$29.50 - $29.50Current price $29.50| / -
Gravity: Analog pH Sensor / Meter Pro Kit For Arduino
Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online ...
Original price $56.90 - Original price $56.90Original price$56.90$56.90 - $56.90Current price $56.90| / -
Grove - Infrared Receiver
There is an IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38...
Original price $3.89 - Original price $3.89Original price$3.89$3.89 - $3.89Current price $3.89| / -
Pack of 50 female-female jumper wires in various colors
Ideal for use with experimental boards!
Original price $5.00 - Original price $5.00Original price$5.00$5.00 - $5.00Current price $5.00| / -
Microwave motion radar
The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...
Original price $2.00 - Original price $2.00Original price$2.00$2.00 - $2.00Current price $2.00| / -
Neopixel Stick with 8 RGB WS2812 LEDs and integrated driver
Stick with Neopixel technology with 8 RGB LEDs that can be individually managed, each of which can produce 256 shades of its own color, determining a total of 16,777,216 colors. The data channel f...
Original price $6.50 - Original price $6.50Original price$6.50$6.50 - $6.50Current price $6.50| / -
Arduino Cloud Nano ESP32 Bundle
The Arduino Nano ESP32 is the new member of our iconic Nano family. This board brings all the power of the well-known ESP32-S3 with the full support of the Arduino ecosystem. Whether you're a begin...
Original price $43.88Original price $43.88 - Original price $43.88Original price $43.88Current price $30.00$30.00 - $30.00Current price $30.00| / -
Arduino Cloud Nano RP2040 Connect Bundle
The Arduino Nano RP2040 Connect is the premium choice for RP2040 devices, and the perfect option for creating tiny connected devices. It has built-in sensors that can be used to turn your creations...
Original price $45.93Original price $45.93 - Original price $45.93Original price $45.93Current price $35.00$35.00 - $35.00Current price $35.00| / -
Arduino Cloud UNO R4 WiFi Bundle
The Arduino UNO R4 WiFi is the latest and more powerful member of the UNO family. It combines the processing power and exciting new peripherals of the RA4M1 microcontroller from Renesas with the wi...
Original price $51.00Original price $51.00 - Original price $51.00Original price $51.00Current price $35.00$35.00 - $35.00Current price $35.00| / -
TS80P (Main) Smart Soldering Iron
TS80P is the upgraded version of TS80 Smart Soldering Iron. TS80P is a smart soldering iron powered by USB Type-C® PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks an...
Original price $49.00 - Original price $49.00Original price$49.00$49.00 - $49.00Current price $49.00| / -
Gravity: Analog Electrical Conductivity Sensor / Meter For Arduino
DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of an aqueous solution, and then to evaluate the water quality, which is often used...
Original price $69.90 - Original price $69.90Original price$69.90$69.90 - $69.90Current price $69.90| / -
DC-DC Power Module 25W
This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output vol...
Original price $8.50 - Original price $8.50Original price$8.50$8.50 - $8.50Current price $8.50| / -
MP2636 Power Booster & Charger Module
In many applications, lithium batteries are used as our power solutions. In this kind of application, the most two important things are the power boost and battery charger. These two points are a p...
Original price $8.00 - Original price $8.00Original price$8.00$8.00 - $8.00Current price $8.00| / -
20W Adjustable DC-DC Buck Converter with Digital Display
This is a 20W adjustable DC-DC buck converter module with digital display. It is based on LM2596 3A step-down voltage regulator and supports an input of 0~40V DC with an accuracy of ± 0.05V. On a ...
Original price $4.90 - Original price $4.90Original price$4.90$4.90 - $4.90Current price $4.90| / -
Arduino Cloud UNO R4 WIFI Maker Bundle
The Arduino UNO R4 WiFi is the latest and more powerful member of the UNO family. It combines the processing power and exciting new peripherals of the RA4M1 microcontroller from Renesas with the wi...
Original price $85.00 - Original price $85.00Original price$85.00$85.00 - $85.00Current price $85.00| / -
Grove - 3-Axis Digital Accelerometer (±16g)
This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applic...
Original price $10.90 - Original price $10.90Original price$10.90$10.90 - $10.90Current price $10.90| / -
Grove - 4 pin Male to Grove 4 pin Cable (5 Pcs)
With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (l...
Original price $2.00 - Original price $2.00Original price$2.00$2.00 - $2.00Current price $2.00| / -
Grove - 4 pin Female to Grove 4 pin Cable (5 Pcs)
The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54 mm pitch connector.
Original price $3.50 - Original price $3.50Original price$3.50$3.50 - $3.50Current price $3.50| / -
Grove - Thumb Joystick
The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module...
Original price $5.85 - Original price $5.85Original price$5.85$5.85 - $5.85Current price $5.85| / -
CAN-BUS Shield v2
It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks to the CAN-BUS, makers are able to hack their cars! It adopts MCP2515 CAN-BUS controller with SPI interfac...
Original price $32.10 - Original price $32.10Original price$32.10$32.10 - $32.10Current price $32.10| / -
Grove - Universal 4 Pin Buckled 50cm Cable (5 Pcs)
Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 50 cm cables
Original price $3.50 - Original price $3.50Original price$3.50$3.50 - $3.50Current price $3.50| /