Skip to content
Seeed

Seeed

  • $4.50

    Base Shield provides a simple way to connect with Arduino boards and help you get rid of breadboard and jumper wires. With the 16 on-board Grove Connectors, you can easily connect with over 300 Grove modules! The pinout of Base Shield V2 is compatible with the Arduino UNO, Arduino Leonardo and th...

    View full details
    $4.50
  • $10.90

    Grove-Temperature & Humidity Sensor Pro is a high accuracy temperature and humidity sensor based on the DHT22 module (also known as AM2302 or RHT03). High-cost performance and high precision make it ideal for temperature and humidity monitoring of Arduino and Raspberry Pi, you can also use it...

    View full details
    $10.90
  • $4.30

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 50 cm cables

    $4.30
  • $93.19

    Beyond the Grove Shield is a bunch of Grove sensors and actuators with build-in Grove interfaces, makes your prototyping faster and easier. Simply plug in the modules and you are ready to create. Part ListGrove- Button 1Grove - Sound Sensor 1Grove - 3-Axis Digital Accelerometer(±1.5g) 1Grove - To...

    View full details
    $93.19
  • Sold out
    $27.00

    It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks to the CAN-BUS, makers are able to hack their cars!  It adopts MCP2515 CAN-BUS controller with SPI interface and MCP2551 CAN transceiver to give you Arduino CAN-BUS capability. Default pinout is OBD-II and CA...

    View full details
  • $10.50

    Simply connect it to Grove - Base shield and program it, when anyone moves in its detecting range, the sensor will output HIGH on its SIG pin. Features Grove compatible interface Adjustable detecting distance Adjustable holding time

    $10.50
  • $17.50

    Compared to LCD, OLED screens have a number of advantages such as high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power consumption. Features Grove compatible interface Communicate Mode:I2C Low power consumption Displa...

    View full details
    $17.50
  • $12.90

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to acceleration and can use different ranges of angular rate measurement. It is provided with a detail...

    View full details
    $12.90
  • $5.90

    Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level.

    $5.90
  • $3.20

    With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (like the Arduino MKR family). In fact, this cable turns the 4 pin JST connectors of the atmospheric s...

    View full details
    $3.20
  • $3.30

    The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog pins...

    View full details
    $3.30
  • Sold out
    $5.40

    The main component of the module is a simple microphone, which is based on the LM386 amplifier and an electret microphone. This module’s output is analog and can be easily sampled and tested by an Arduino. Features Easy to use Provides analog output signal Easily integrates with Logic modules on...

    View full details
  • Sold out
    $16.40

    The visible portion of the OLED measures 1.12” diagonally and contains 96x96 grayscale pixels. Because the display uses OLEDs, there is no backlight, and the contrast is very high.This OLED uses the SSD1327 driver chip, which manages the display. You can communicate to the driver chip using 4-wir...

    View full details
  • $13.10

    The sensor(chip) used in the module is designed with Sensirion’s CMOSens® technology. The chip is well calibrated, linearized and compensated for digital output.The typical accuracy of this module can be ±2%RH (for relative humidity) and ±0.3°C (for temperature). This module is compatible with 3....

    View full details
    $13.10
  • $3.20

    The resistance of photoresistor decreases when the intensity of light increases. A dual OpAmp chip LM358 on board produces voltage corresponding to intensity of light(i.e. based on resistance value). The output signal is an analog value, the brighter the light is, the larger the value.This module...

    View full details
    $3.20
  • Sale
    Original price $11.90
    Current price $9.90

    Features:   Digital Voice Recognition Support over 500 digital voice commands Compatible with the Grove system

    Original price $11.90
    Current price $9.90
  • $6.50

    The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module is in working mode, it will output two analog values, representing two directions. Compared to a no...

    View full details
    $6.50
  • Sold out
    $3.20

    The resistance of a thermistor will increase when the ambient temperature decreases. It’s this characteristic that we use to calculate the ambient temperature. The detectable range of this sensor is -40 - 125ºC, and the accuracy is ±1.5ºC

  • $9.80

    It can widely measure pressure ranging from 300 mbar to 1200 mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolution mode. The chip only accepts 1.8V to 3.6V input voltage. However, with the outer circuit on the pcb added, this module becomes compatible with 3.3V and 5V. There...

    View full details
    $9.80
  • $4.30

    The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54mm pitch connector. Specification Grove side uses buckled connector (JST style 2.0mm pitch) Female jumper is 2.54mm pitch pin header compatible

    $4.30
  • $7.50

    Breadboard 1 pin dual-male jumper wire 75pcs pack. Pack comes with 2 different length: 200mm (25pcs) and 100mm(50pcs), Perfect design and adequate quality for breadboard and Arduino connection, you can use it over and over again!

    $7.50
  • $15.30

    Features Grove interface compatible Wide supply voltage range: 2.5V-7V Interface The sensor is quite small and use a tiny connector called a JST connector. These connectors have three wires: ground, vcc, and the output. Because the sensor fires continuously and don't need any clocking to initia...

    View full details
    $15.30
  • Sold out
    $7.20

    The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or one stepper motor up to 12V/1.2A. With the on-board MCU, it easily works with Arduino via the Grove I2C interface. This diver board is based on TB6612FNG, which is a driver IC for DC motor and stepper motor with o...

    View full details
  • $5.90

    This sensor is very simple to use, you insert in into the soil and read the data. With this sensor in the right project, your plants can let you know when it's time to water them. Features Soil moisture sensor based on soil resistivity measurement Easy to use 2.0 cm X 6.0 cm grove module

    $5.90
x