Skip to content
Free shipping in the US*! Place your order in time: check our policy for details
Free shipping in the US*! Place your order in time: check our policy for details
Sensors

Sensors

Unveil the world of sensing and detection

Sensors

Unveil the world of sensing and detection

Sensors

  • Grove - Temp & Humi & Barometer Sensor (BME280)

    This module can be used to measure temperature, atmospheric pressure and humidity accurately and fast. As the atmospheric pressure changes with altitude, it can also measure approximate altitude of...

  • Grove - Sound Sensor

    The main component of the module is a simple microphone, which is based on the LM386 amplifier and an electret microphone. This module’s output is analog and can be easily sampled and tested by an ...

  • Grove - PIR Motion Sensor

    Simply connect it to Grove - Base shield and program it, when anyone moves in its detecting range, the sensor will output HIGH on its SIG pin. Features: Grove compatible interface Adjustable d...

  • Grove - Moisture Sensor

    This sensor is very simple to use, you insert in into the soil and read the data. With this sensor in the right project, your plants can let you know when it's time to water them. Features: Soi...

  • Grove - Light Sensor v1.2

    The resistance of photoresistor decreases when the intensity of light increases. A dual OpAmp chip LM358 on board produces voltage corresponding to intensity of light(i.e. based on resistance value...

  • Grove - IR Distance Interrupter v1.2

    The module consists of an IR LED and a photosensor (phototransistor) pair. The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected...

  • Grove - Infrared Reflective Sensor v1.2

    The sensor consists of an IR LED and a photo sensor (phototransistor). The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected by ...

  • Grove - Hall Sensor

    There is a continuous-time switch on this Grove module. The output from the module switches from low (turns on) when a magnetic field (south polarity) is perpendicular to the Hall sensor and when i...

  • Grove - Gas Sensor (MQ9)

    It can detect combustible Carbon Monoxide, Coal Gas and Liquefied Gas. The sensitivity can be adjusted by the potentiometer. Hardware Overview This is an Analog output sensor. It needs to be conn...

  • Grove - Barometer Sensor (BMP280)

    It can widely measure pressure ranging from 300 mbar to 1200 mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolution mode. The chip only accepts 1.8V to 3.6V input voltage. Howe...

  • Grove - Air quality sensor v1.3

    This sensor is designed for comprehensive monitor over indoor air condition. It's responsive to a wide scope of harmful gases, as carbon monoxide, alcohol, acetone, thinner, formaldehyde and so on....

  • Grove - 80cm Infrared Proximity Sensor

    This sensor SharpGP2Y0A21YK, boasts a small package and very low current consumption, takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80c...

  • Grove - 6-Axis Accelerometer & Gyroscope

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to...

  • Grove - Infrared Receiver

    There is an IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38...

  • Grove - Infrared Emitter

    An infrared LED is like any other LED, with its color centered around 940nm. We can not only use the emitter to transmit data or commands, but also to emulate remotes to control your home appliance...

  • SOIL HUMIDITY SENSOR, WATERMARK 2 M / 75 CM (Pack of 6)

    Watermark sensor measures on a range 0 – 239 cbars, no maintenance, frost resistant. The Watermark sensor is a rustical tool, accessible, that doesn’t need maintenance. Simple to use, accurate, per...

  • Gravity: Formaldehyde (HCHO) Sensor

    The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to...

  • Gravity: I2C Ozone Sensor (0-10ppm)

    Gravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference ability, high sta...

  • Gesture Breakout with APDS-9960

    With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...

  • NFC/RFID reader with two transponders

    It can function as an RFID card reader/writer, NFC reader with Android smartphone and in wireless mode with two identical devices. It can be used with Arduino to create access control devices. The...

  • Microwave motion radar

    The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...

  • IR receiver sensor

    It has only three terminals and operates on 5 V power supply. Vdd= + 5 Vdc, GND= ground, OUT= TTL signal output

  • Grove - 3-Axis Digital Accelerometer (±16g)

    This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applic...

  • Gravity: Analog pH Sensor / Meter Pro Kit For Arduino

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online ...

x