Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal $0.00
Expand your capabilities

Expand your capabilities

Expand your capabilities

Expand your capabilities

  • Grove - HCHO Sensor

    Its design is based on the WSP2110 whose conductivity changes with the concentration of VOC gas in air. Through the circuit, the conductivity can be converted to output signal that corresponding to...

  • MP2636 Power Booster & Charger Module

    In many applications, lithium batteries are used as our power solutions. In this kind of application, the most two important things are the power boost and battery charger. These two points are a p...

  • 20W Adjustable DC-DC Buck Converter with Digital Display

    This is a 20W adjustable DC-DC buck converter module with digital display. It is based on LM2596 3A step-down voltage regulator and supports an input of 0~40V DC with an accuracy of ± 0.05V. On a ...

  • Stereo Enclosed Speaker - 3W 8Ω

    Stereo Enclosed Speaker is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size and scr...

  • Waterproof Ultrasonic Sensor with Separate Probe

    Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! This is a waterproof & ultrason...

  • DC-DC Power Module 25W

    This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output vol...

  • Gravity: Photoelectric Water / Liquid Level Sensor For Arduino

    This is a photoelectric water liquid level sensor that operates using optical principles. The advantages of this photoelectric water liquid level sensor are good sensitivity and no need for mechani...

  • DFPlayer - A Mini MP3 Player

    DFPlayer mini MP3 player is a small and low cost MP3 module player with a simplified output directly to the speaker. The module can be used as a standalone module with attached battery, speaker and...

  • J-Link 19-pin Cortex-M Adapter

    The J-Link 19-pin Cortex-M Adapter may also be used to connect J-Link to a non Cortex-M target as far as the target connector uses the same pinout as shown below. By default, TRST is not connected,...

  • SEGGER 50-Mil 10-Pin Patch Adapter

    Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. SEGGER J-Link deb...

  • J-Link BASE Compact

    SEGGER J-Link BASE Compact:   Supports a broad range of microcontrollers  Supports direct download into RAM and flash memory Multiple CPUs supported—8051, PIC32, RX, ARM7/9/11, Cortex-M/R/A, R...

  • J-Link PLUS Compact

    Get the SEGGER J-Link PLUS Compact debug probe: a compact version of the J-Link PLUS. Mounts securely & unobtrusively into development and end user equipment. Based on 32-bit RISC CPU, it commu...

  • J-Link EDU Mini classroom package

    Get the J-Link EDU Mini, offering the same functionality as the J-Link EDU but in a reduced form factor. The J-Link EDU Mini Classroom Edition includes twelve J-Link EDU Mini units on special offer...

  • Grove - Tilt Switch

    Inside the tilt switch is a pair of balls that make contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a connection. It is wired to the SI...

  • Grove - Line Finder v1.1

    Most of automated robotic projects start from a line-following robot, Grove - Line finder v1.1, designed to achieve this task easily and quickly. Those eye-like sensors on the board are actually IR...

  • Grove - Infrared Receiver

    There is an IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter. The IR detector have a demodulator inside that looks for modulated IR at 38...

  • Grove - Digital Infrared Temperature Sensor

    Both the IR sensitive thermopile detector chip and the signal conditioning chip are integrated in the same package.This module communicates with Arduino using SMBus and up to 127 sensors can be rea...

  • Grove - Gas Sensor (MQ2)

    The Grove - Gas Sensor(MQ2) module is useful for gas leakage detection (in home and industry). It can detect combustible gas and smoke. The output voltage from the Gas sensor increases when the con...

  • TS80P (Main) Smart Soldering Iron

    TS80P is the upgraded version of TS80 Smart Soldering Iron. TS80P is a smart soldering iron powered by USB Type-C® PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks an...

  • Solar Power Manager For 12V Lead-Acid Battery

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and applica...

  • Solar Power Manager 5V

    FRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application ...

  • Solar Power Manager (for 9V/12V/18V solar panel)

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and applica...

  • Solar Lipo Charger (3.7V)

    This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the con...

  • RS422 / RS485 Shield for Arduino UNO

    Some RS485 shields for the Arduino are not suitable for professional use, because they come without galvanic isolation between the RS485 bus and the Arduino. Without such isolation, it's possible ...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare