Skip to content
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal $0.00
Expand your capabilities

Expand your capabilities

Expand your capabilities

Expand your capabilities

  • Raspberry Pi to Arduino MKR bridge HAT

    Note: This item is a kit which requires assembly and soldering. Different Arduino MKR Shields can be used via our HAT as an extension for the Raspberry Pi. Furthermore, Arduino offers different Ar...

  • Multi-function Environmental Module - CCS811+BME280

    Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and f...

  • Grove Base Shield V2.0 for Arduino

    Grove Base Shield provides a simple way to connect with Arduino boards and help you get rid of breadboard and jumper wires. With the 16 on-board Grove Connectors, you can easily connect with over 3...

  • Grove - RGB LED Stick (15-WS2813 Mini)

    Grove - RGB LED Stick (15-WS2813 Mini) is a cost-effective full color LED stick with 15 chainable and programmable WS2813 mini LEDs. This Grove - RGB LED stick is similar to Grove - RGB LED stic...

  • Grove - High Precision Barometric Pressure Sensor (DPS310)

    Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level. Typical Applications: Indoor Navigation (floo...

  • Grove - Dust Sensor(PPD42NS)

    Provide reliable data for air purifier system Easy maintenance PWM output Grove compatible interface Compact and light design. This Dust Sensor gives a good indication of the air quality in an env...

  • Gravity: Non-contact Digital Water / Liquid Level Sensor For Arduino

    This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achiev...

  • Gravity: IO Expansion Shield for Arduino v 7.1

    Fast robotics prototyping made simple thanks to this expansion shield. No need of soldering and wiring, things that often becomes an issue when a bridged connection happens and components break. Of...

  • Gravity: Nano I/O Shield

    The Nano I/O Sensor Shield is an expansion board for the Arduino Nano. There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino U...

  • Gravity: I2C Oxygen Sensor

    The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference ability, high stablili...

  • Gravity: Analog Electrical Conductivity Sensor / Meter For Arduino

    DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of an aqueous solution, and then to evaluate the water quality, which is often used...

  • ArduiBox Open Standard with transparent lid

    Do you want to install your Arduino UNO project into a control cabinet? Look no further! The ArduiBox Open DIY kits house an Arduino board and mount it to a DIN rail. The kit comes with a prototypi...

  • Breadboard Jumper Wire Pack (200mm&100mm)

    Breadboard 1 pin dual-male jumper wire 75pcs pack. The pack comes with 2 different lengths: 200mm (25pcs) and 100mm(50pcs). Perfect design and adequate quality for breadboard and Arduino connectio...

  • ArduiBox MKR Standard with transparent lid

    At the heart of the enclosure is an additional PCB with an integrated voltage regulator (soldering required) and prototyping area. This PCB comes with slots for the Arduino MKR or Portenta H7 board...

  • 3Dsimo MultiPro (4in1)

    3Dsimo MultiPro is multifunctional tool that offers 4 basic functions: 3D drawing - using any current and future 3D printing filament (diameter of 1,75mm) Soldering - using soldering attachme...

  • Robotis Mini

    The ROBOTIS MINI can be programmed using RoboPlus Task (R+Task), a graphical, drag-and-drop programming tool based on C++. You can also create complex motions or choreography using RoboPlus Motion ...

  • 3Dsimo KIT 2 (4in1)

    Next generation of our open-ource pen. All data is available at our Github, where you can find firmware, circuit board and 3D printed parts open for customization, so you can customize 3Dsimo Kit 2...

  • Gravity: Analog CO2 Gas Sensor (MG-811 Sensor)

    Great and powerful sensor for everyone that wants to know the exact concentration of CO2(Carbon Dioxide) in the air.  This is the first CO2 sensor compatible with Arduino. The output voltage of th...

  • Gravity: HUSKYLENS - AI Machine Vision Sensor

    HuskyLens is an easy-to-use AI machine vision sensor. It is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, color recognition, and ta...

  • CAN-BUS Shield v2

    It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks to the CAN-BUS, makers are able to hack their cars!  It adopts MCP2515 CAN-BUS controller with SPI interfac...

  • Gravity: Analog Capacitive Soil Moisture Sensor - Corrosion Resistant

    This soil Moisture sensor is made of a corrosion resistant material giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data! The product in...

  • URM06 - UART Ultrasonic Sensor

    Ultrasonic sensors emit ultrasonic pulses, and by measuring the time of ultrasonic pulse reaches the object and back to the transducer, the distance of sensor from the target object is calculated. ...

  • Grove - Water Sensor

    The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not thi...

  • Grove - Universal 4 Pin Buckled 50cm Cable (5 Pcs)

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 50 cm cables

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare