Skip to content
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal $0.00
Expand your capabilities

Expand your capabilities

Expand your capabilities

Expand your capabilities

  • Grove - 6-Axis Accelerometer & Gyroscope

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to...

  • Grove - 4-Digit Display

    A 4 digit display module usually uses 12 pins. In this Grove gadget the TM1637 is used to scale down the control pins into two Grove pins. This way It only takes two digital pins from an Arduino to...

  • Grove - 4 pin Male to Grove 4 pin Cable (5 Pcs)

    With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (l...

  • Grove - 4 pin Female to Grove 4 pin Cable (5 Pcs)

    The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54 mm pitch connector.    

  • Grove - 3-Axis Digital Accelerometer (±16g)

    This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applic...

  • Feetech Mini Servo motor 120 degrees 9g

    Feetech Micro 0.12sec/60degrees 1.3kg.cm Analog Servo. This is a great general-purpose actuator for tiny mechanisms. The FS90 is a 9 g analog servo that offers position control over an approximate...

  • USB Cable Type A Male to Micro Type B Male

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1 m This cable is needed to connect your PC to a board that uses this kind of connector.

  • Two Wheels Balance Car chassis with JGA Motor Kit

    The kit uses JGA25 DC geared motors and optical encoders for higher motor control accuracy and double-layer acrylic plates for easy placement of sensors and development boards. With this kit you c...

  • Robot with 58mm Omnidirectional Wheel & Smart Car Chassis Kit

    The three-wheel drive omnidirectional wheel platform uses omnidirectional wheel technology for omnidirectional motion. It includes vertical and lateral movements. The main part of the car consists ...

  • Wire Harness - 2x4 Saleae

    4 wires intended for ground and 4 for signals. Color coded to match Saleae software (channels 4-7) Total length is 0,8 meter (31,5")

  • PCBite kit with 4x SP10 probes and test wires

    The complete solution for holding and measuring your circuit board. PCBite is the perfect tool for handling your PCB during the design process. Powerful magnets combined with a stainless steel bas...

  • Gravity: Analog pH Sensor / Meter Pro Kit For Arduino

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online ...

  • Gravity: Analog pH Sensor - Meter Kit

    Analog pH Sensor / Meter Kit specially designed for Arduino controllers and has convenient and practical "Gravity" connector and a bunch of features. Instant connection to your probe an your Arduin...

  • Gravity: 37 Pcs Sensor Set for Arduino

    Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck. In the version of this sensor kit, we ad...

  • Gravity: 27 Pcs Sensor Set for Arduino

    If you want to start playing with sensors, this sensor kit for arduino will be the perfect choice for you to get started. It comes with bundle of the most popular sensors such as light sensors, gas...

  • Mini breadboard - White

    This is a small breadboard (4,6x3,6 cm) with 170 tie points. It is self-adhesive and compatible with the Arduino Proto Shield.

  • Grove - I2C Hub (6 Port)

    We've already released the Grove - I2C Hub (4 Port), now comes the 6 port version, the same size, two more connectors, almost half the price! As you may know, the 7 address length I2C bus allows up...

  • CircuitMess Wheelson

      Autonomous cars are the future and we’ll show you how it works. This tiny wheeled robot has a camera and a microcomputer and can be programmed to autonomously navigate a small road while driv...

  • Gravity: I2C Ozone Sensor (0-10ppm)

    Gravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference ability, high sta...

  • Grove Shield for Arduino Nano

    This shield pulls out the pins of the motherboard and expands to 8 Grove connectors, including 3 Grove digital connectors, 3 Grove analog connectors, 1 Grove I2C connector, and 1 Grove UART connect...

  • 4x SP10 probes and test wires

    No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.  Saves time and frustra...

  • TS80P (more) Soldering Iron (US)

    TS80P controller is made of aluminum alloy through CNC into a compact structure and high-tech design, ergonomic, beautiful and fashionable. TS80P is a smart soldering iron powered by USB Type-C PD...

  • Gravity WiFi IoT Module

    This WiFi IoT module would be an excellent choice for IoT classroom teaching and smart home projects. It supports multiple programming platforms, such as MakeCode, Mind+, and Arduino IDE, and can a...

  • Arduino MKR M-BUS Master Shield

    This Arduino MKR shield expand your Arduino MKR with functions for smart metering via meter bus (M-BUS). With the M-BUS Master Shield you can read consumption meters for heat, gas, oil, water that ...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare