Futura Group

A set consisting of 10 blue 5 mm LEDs, 10 green, 10 red, 10 yellow, 10 white, 10 common anode RGB and 10 common anode bicolour (red-green) LEDs.

Ideal for use with experimental boards! The wires are separable for ease of use.

Ideal for use with experimental boards!

Plastic case organized in compartments containing 300 LEDs of 3 and 5 mm with assortment in red, blue, yellow, green and white colors. 40 LEDs per color of 3mm, 20 LEDs per color of 5mm.

Plastic package containing 10 pieces of the following horizontal mount trimmer values: 500 ohm (501) 1 kohm (102) 2 kohm (202) 5 kohm (502) 10 kohm (103) 20 kohm (203) 50 kohm (503) 100 k...

Solder sucker pump made of aluminum and ABS. Length 194 mm, diameter 20 mm. Teflon tip.

It eliminates harmful welding fumes, various resins and pyrograph fumes from the workstation. It can be easily adjusted in several positions to ensure optimal smoke extraction. It comes complete wi...

Soldering station with digital temperature control between 160°C and 480°C and indication through display.

DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer). The maximum available curre...

Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

It allows to provide the right degree of current to the batteries protecting them from an excess of discharge or charge in order to prolong their life cycle as much as possible. Attention! use onl...

A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

A small photovoltaic panel, ideal for conducting experiments with solar energy.

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects im...

This is a Neopixel technology ring with 12 RGB LED diodes that can be individually controlled, each of which can produce 256 shades of its own color, resulting in a total of 16,777,216 colors. The ...

This module is equipped with 4 relays that allow you to activate/deactivate the load connected to them 240V/10A max. It has optoisolated inputs and status LEDs.

The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...

40 separable wires, each 20 cm long, with female 1-pole connector on one end and male 1-pole connector on the other end. Ideal for use with experimental plates.

It has only three terminals and operates on 5 V power supply. Vdd= + 5 Vdc, GND= ground, OUT= TTL signal output

Contents of the package: 25 pieces - 0 Ohm 25 pieces - 10 Ohm 25 pieces - 20 Ohm 25 pieces - 47 Ohm 25 pieces - 470 Ohm 25 pieces - 2.2 KOhm 25 pieces - 4.7 KOhm 25 pieces - 22 KOhm 25 p...

This is a 840-point experimental ABS board with a self-adhesive base. Dimensions (mm): 174x66,5x8,5 mm Weight: 100 grams.

This is a 830-point experimental ABS board with a self-adhesive base. Dimensions (mm): 165x55x10 Weight: 69 grams.

Dimensions: 82 x 55 mm.  White color.

Also ideal for adjusting the brightness of LED lights and strips.