Skip to content
Green & Sustainability

Green & Sustainability

  • $70.80

    The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions. With the simplicity of integration and scalability of the Arduino ecosystem, the board combines four state-of-the-art sensors from Bosch Sensortec: BHI260AP motion sensor system with integr...

    View full details
    $70.80
  • $199.00

    It can be positioned anywhere and is suitable for precision farming, smart agriculture, and other applications requiring intelligent control in remote locations. Power can be either supplied via solar panel or DC input. Remotely control your application through the Arduino Cloud (or third-party ...

    View full details
    $199.00
  • Sold out
    $56.00

    Gardens are a way to contribute to contrast the global warming. Maybe you don't have a backyard, but you have a balcony or a windowsill, in which you could put some plants! Of course you have to take care of them, and even if you don't have a green thumb, you can successfully grow plants thanks t...

    View full details
    $56.00
  • $19.50

    Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNECTOR CARRIER provides Seeed Studio's Grove connectors to your MKR board. The MKR CONNECTOR CARRIER shield is an essential tool for rapidly prototyping activity. ...

    View full details
    $19.50
  • $17.50

    Its design is based on the WSP2110 whose conductivity changes with the concentration of VOC gas in air. Through the circuit, the conductivity can be converted to output signal that corresponding to the gas concentration. This sensor can detect the gas whose concentration is up to 1 ppm. It’s suit...

    View full details
    $17.50
  • $34.40

    These sensors are of the latest generation and measure: Atmospheric pressure Temperature and humidity Light intensity (in LUX, max 650) To help you build projects and store the data collected locally, this shield has a slot for a microSD card (not provided). There is a ready to use librar...

    View full details
    $34.40
  • $5.90

    Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level.

    $5.90
  • Sold out
    $12.70

    Provide reliable data for air purifier system Easy maintenance PWM output Grove compatible interface Compact and light design.

    $12.70
  • $89.00

    DFRobot released its latest wide range Arduino infrared CO2 sensor, which effective range is up to 0~50000ppm. This sensor is based on non-dispersive infrared (NDIR) technology and has good selectivity and oxygen-free dependency. It integrates temperature compensation and support UART communicati...

    View full details
    $89.00
  • $9.50

    The Nano I/O Sensor Shield is an expansion board for the Arduino Nano boards.There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino UNO/arduino Leonardo. In addition, the sensor shield adopts Gravity interface that each pinout ...

    View full details
    $9.50
  • $14.50

    It is suitable for detecting Alcohol, Benzine, CH4, Hexane, LPG, CO. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer. Note:The sensor value only reflects the approximated t...

    View full details
    $14.50
  • $56.00

    Great and powerful sensor for everyone that wants to know the exact concentration of CO2(Carbon Dioxide) in the air.  This is the first CO2 sensor compatible with Arduino. The output voltage of the module falls as the concentration of the CO2 increases. The potentiometer onboard is designed to s...

    View full details
    $56.00
  • $19.90

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. This medium-power high-efficiency solar power management module allows you to charge...

    View full details
    $19.90
  • $5.90

    This soil Moisture sensor is made of a corrosion resistant material giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data!The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is c...

    View full details
    $5.90
  • $30.80

    Both the IR sensitive thermopile detector chip and the signal conditioning chip are integrated in the same package.This module communicates with Arduino using SMBus and up to 127 sensors can be read via two common wires. Thanks to the low noise of module’s amplifier, 16-bit ADC and a powerful DSP...

    View full details
    $30.80
  • $29.90

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. Solar Power Manager is a complete small power and high-efficiency solar power manag...

    View full details
    $29.90
  • $4.90

    This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the connection is simple and convenient. Used with the solar battery and lithium battery, you can quickly bu...

    View full details
    $4.90
  • $20.90

    Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and fast Measurement. The BME280 can provide temperature and humidity compensation for CCS811 to improve ...

    View full details
    $20.90
  • $9.90

    This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection. No contact with liquid makes the module suitable for hazardous...

    View full details
    $9.90
  • Sold out
    $53.90

    The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this arduino-compatible oxygen sensor can be widely applied to fields like ...

    View full details
    $53.90
  • $69.90

    Gravity: Analog Electrical Conductivity Sensor / Meter For Arduino

    $69.90
  • $13.90

    This CCS811 Air Quality Sensor Breakout Board can measure the eCO2 (equivalent CO2) and TVOC (Total Volatile Organic Compounds) density. It can be widely used in many applications, such as air quality detection, air purifiers, ventilation system, and so on. This CCS811 air quality sensor uses AMS...

    View full details
    $13.90
  • $3.30

    The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog pins...

    View full details
    $3.30
  • $3.20

    The resistance of a thermistor will increase when the ambient temperature decreases. It’s this characteristic that we use to calculate the ambient temperature. The detectable range of this sensor is -40 - 125ºC, and the accuracy is ±1.5ºC

    $3.20
x