Skip to content
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal $0.00
Robotics

Robotics

Where ideas take motion

Robotics

Where ideas take motion

Robotics

  • DC/DC converter with adjustable 1.5-35V output

    Step-Down DC/DC switching converter, with particularly small dimensions (48.35 x 23.35 x 14 mm), capable of converting a DC voltage between 3 and 40 volts into an output voltage from 1.5 to 35 volt...

  • L298 driver for DC/Stepper motors

    Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...

  • DC/DC Step-up converter with 4-30V output

    DC/DC step-up converter with particularly small dimensions (51 x 21.5 x 13 mm), capable of converting a DC voltage between 3.5 and 30 volts into an output voltage from 4 to 30 volts (adjustable via...

  • Pack of 50 female-female jumper wires in various colors

    Ideal for use with experimental boards!

  • Box of 100 pcs M.O. 10 VAL. trimmer resistors from 500 to 1 Mohm

    Plastic package containing 10 pieces of the following horizontal mount trimmer values: 500 ohm (501) 1 kohm (102) 2 kohm (202) 5 kohm (502) 10 kohm (103) 20 kohm (203) 50 kohm (503) 100 k...

  • Bluetooth Low Energy 4.0 Module - HM-10

    This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K F...

  • Solar cell 1 V - 200 mA

    A small photovoltaic panel, ideal for conducting experiments with solar energy.

  • Mini solar cell 2V 200mA

    A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

  • 5.5 V 1 watt solar panel

    Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

  • 6 volt 3.5 watt solar panel

    This monocrystalline photovoltaic panel is ideal for charging batteries, smartphones, robotics.  

  • Mini encapsulated solar cell 2V 0,6W

    A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.

  • DC/DC Step-Down converter with 1.2-30 V 5A output

    DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer). The maximum available curre...

  • Breadboard 150x90

    150x90 mm through hole board PCB

  • Breadboard 100x50

    100 x 50 mm through hole board PCB

  • Breadboard - 840 contacts

    This is a 840-point experimental ABS board with a self-adhesive base. Dimensions (mm): 174x66,5x8,5 mm Weight: 100 grams.

  • Gesture Breakout with APDS-9960

    With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...

  • Speed control for DC motors from 3 to 35V 5A

    Also ideal for adjusting the brightness of LED lights and strips.

  • Breadboard - 400 contacts

    Dimensions: 82 x 55 mm.  White color.

  • Breadboard - 830 contacts

    This is a 830-point experimental ABS board with a self-adhesive base. Dimensions (mm): 165x55x10 Weight: 69 grams.

  • Box 525 1% precision resistors - 17 values

    Contents of the package: 25 pieces - 0 Ohm 25 pieces - 10 Ohm 25 pieces - 20 Ohm 25 pieces - 47 Ohm 25 pieces - 470 Ohm 25 pieces - 2.2 KOhm 25 pieces - 4.7 KOhm 25 pieces - 22 KOhm 25 p...

  • 40 colored female-female jumper wires

    Ideal for use with experimental boards! The wires are separable for ease of use.

  • 40 colored male-female jumper wires

    40 separable wires, each 20 cm long, with female 1-pole connector on one end and male 1-pole connector on the other end. Ideal for use with experimental plates.

  • 40 colored male-male jumper wires

    Ideal for use with experimental plates.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare