Skip to content
Free shipping on orders over $50 to a shipping address within the contiguous United States!
Free shipping on orders over $50 to a shipping address within the contiguous United States!
Top-down view of the Make Your UNO Soldering Bundle box opened, showing the safety glasses, soldering iron, pliers, and tweezers inside.

Make Your UNO Soldering Bundle

SKU uno-soldering-110 Barcode uno-soldering-110 Show more
$0.00 - $0.00
$0.00
$79.50
$79.50 - $79.50
$79.50

With this bundle you have all the tools and components needed to follow the experience of building your very own Arduino UNO and the synth shield.

Overview

Begin your journey to become a maker with the Make Your UNO Soldering Bundle, which includes the Arduino Make Your UNO Kit and all the needed tools to build a soldering station at home. 

With the Arduino Make Your UNO Kit you will learn the basics of electronics by assembling your Arduino UNO and become familiar with soldering by mounting every single component.

The Arduino Soldering Kit contains all the tools and safety gear needed to set your very own soldering station. The temperature of the soldering iron included in this kit can be adjusted within the range of 200°C to 450°C. Additionally, it has an easy-to-use mechanism to exchange the soldering tips.

Tech Specs

The Soldering Kit includes:

  • 60 Watts - 110V soldering iron with adjustable temperature
  • 5 tips for soldering iron
  • 1 stand for soldering iron
  • Lead-free solder wire
  • Safety glasses
  • Wire cutter
  • Precision Tweezers

The Arduino Make Your UNO Kit contains:

  • Arduino Make Your UNO
  • 1 x Make Your UNO PCB
  • 1 x USB C Serial adapter Board
  • 7 x Resistors 1k Ohm
  • 2 x Resistors 10k Ohm
  • 2 x Resistors 1M Ohm
  • 1 x Diode (1N4007)
  • 1 x 16MHz Crystal
  • 4 x Yellow LEDs
  • 1 x Green LED
  • 1 x Push-Button
  • 1 x MOSFET
  • 1 x LDO (3.3V)
  • 1 x LDO (5V)
  • 3 x Ceramic capacitors (22pF)
  • 3 x Electrolytic capacitors (47uF)
  • 7 x Polyester capacitors (100nF)
  • 1 x Socket for ATMega 328p
  • 2 x I/O Connectors 
  • 1 x Connector header 6 pins
  • 1 x Barrel jack connector
  • 1 x ATmega 328p Microcontroller
     
  • Arduino Audio Synth
  • 1 x Audio Synth PCB 
  • 1 x Resistor 100k Ohm
  • 1 x Resistor 10 Ohm
  • 1 x Audio amplifier (LM386)
  • 1 x Ceramic capacitors (47nF)
  • 1 x Electrolytic capacitors (47uF)
  • 1 x Electrolytic capacitors (220uF)
  • 1 x Polyester capacitor (100nF)
  • 4 x connectors pin header 
  • 6 x potentiometer 10k Ohm with plastic knobs
     
  • Spare parts
  • 2 x Electrolytic capacitors (47uF)
  • 2 x Polyester capacitor (100nF)
  • 2 x Ceramic capacitors (22pF)
  • 1 x Push-Button
  • 1 x Yellow LEDs
  • 1 x Green LED
     
  • Mechanical parts
  • 5 x Spacers 12mm
  • 11 x Spacers 6mm
  • 5 x screw nuts
  • 2 x screws 12mm

Documentation

Arduino Make Your Uno Kit Datasheet

DATASHEET IN .PDF

Arduino Soldering Kit 110V Datasheet

DATASHEET IN .PDF

 

Get Inspired

Customer Reviews

Overall rating: 4.3 / 5 from 9 reviews.

Cost was right for what you get. The kit arrived in less than a week so kudos there. The on line tutorials are great. My only complaint is that there were no written instructions nor just a parts inventory. Especially with resistors, hard to see the values. Overall, great kit.

Raymond M. 5/5 Verified

Make Your UNO Soldering Bundle

Excellent way to learn soldering and gain a better understanding of a UNO board. Very happy!

Todd L. 5/5 Verified

Make Your UNO Soldering Bundle

Definitely a great a great product. IF YOU HAVE NEVER SOLDERED BEFORE: please be weary, it is very challenging to make sure your board is being soldered correctly as you are learning to solder. Tech team is great for troubleshooting but this is NOT A PROJECT for those that are not willing to put in more than a few hours to learn soldering. Also if you are not willing to accept that your work may have to be redone over and over, this is not for you!

Ben K. 4/5 Verified

Make Your UNO Soldering Bundle

The only thing that would have been nice to have with it would have been something to help remove a component of you've put it on the wrong way like a solder wick or sucker. I might have broken a connection trying to remove a component

Alexander G. 3/5 Verified

Make Your UNO Soldering Bundle

The instructions were not easy to follow. I messed up a couple times and found it confusing. A interesting product but I felt hard to use for a beginner.

James H. 2/5 Verified

Make Your UNO Soldering Bundle

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare